Lithium-ion batteries are essential to modern technology, powering smartphones, laptops, medical devices and even electric cars. However it is important to note that rather than using lithium metal for battery technologies, manufacturers commonly use lithium carbonate or lithium hydroxide. Moreover, there is more than just one type of lithium ion-battery, and not all are created equal.
Several lithium compounds may be combined with a variety of other materials in order to create lithium batteries. Below,
Lithium Cobalt Oxide
Also known as lithium cobalate or lithium-ion-cobalt batteries, lithium cobalt oxide batteries are made from lithium carbonate and cobalt. Due to their very high capacity, these batteries are used for cellphones, laptops and electronic cameras. The battery has a cobalt oxide cathode and a graphite carbon anode; during discharge, lithium ions move from the anode to the cathode, with the flow reversing on charge. This type of battery has some drawbacks, including a shorter lifespan and a limited specific power, meaning that devices created with these batteries require relatively frequent charging – as smartphone owners can attest. Additionally,
Lithium Manganese Oxide
Lithium manganese oxide batteries are also commonly called lithium manganate or lithium-ion-manganese batteries, or li-manganese or spinel. The technology for this type of battery was first discovered in the 1980s, with the first publication on ithe subject appearing in the Materials Research Bulletin in 1983. The first commercial lithium ion cell made with a lithium manganese oxide as a cathode material was produced in 1996 by Moli Energy.
Lithium manganese oxide batteries are notable for their high thermal stability, and are also safer than other types of lithium-ion batteries. For this reason, they are often used in medical equipment and devices, but they may also be used in power tools, electric bikes and electrical hobby uses. It is also possible to use lithium manganese oxide batteries to power laptops and electric powertrain cars.
Lithium Iron Phosphate
Lithium iron phosphate batteries, also known as li-phosphate batteries, use phosphate as a cathode. Li-phosphate batteries benefit from low resistance properties, which enhance their safety and thermal stability, while other benefits include durability and a long life cycle. Fully charged batteries can be stored with little change to the total life span of the battery’s charge. Li-phosphate batteries are often the most cost-effective option as well, when their long life cycle is taken into consideration.
However, the lower voltage of the li-phosphate battery means that it has less energy than other types of lithium batteries, as lower temperatures reduce performance. Accordingly, these batteries are often used in electric motorcycles as well as other applications that need a long life cycle and significant safety. Electric cars often use these batteries as well, according to Battery Space.
Lithium Nickel Manganese Cobalt Oxide
Also known as lithium-manganese-cobalt-oxide batteries, or NMC, lithium nickel manganese cobalt oxide batteries are made of several materials common in other lithium iron batteries. These involve a cathode combination of nickel, manganese and cobalt. Like other varieties of lithium-ion batteries, NMC batteries can have either a high specific energy or high specific power – they cannot, however, have both properties. This battery is most common in power tools and in powertrains for vehicles. The cathode combination ratio is usually one-third nickel, one-third manganese and one-third cobalt, meaning that the raw material cost is lower than for other options, as cobalt on its own can be quite expensive. According to Battery university, this battery is also commonly preferred for electric vehicles due to its very low self-heating rate.
Lithium Nickel Cobalt Aluminum Oxide
These batteries are also called NCA batteries, and are increasingly important in electric powertrains and in grid storage. NCA batteries are not common in the consumer industry, but are promising for the automotive industry. However, it is a high-energy battery with a good lifespan, even though it is not as safe an option as it could be and is quite costly. The
Lithium titanate, also known as li-titanate, is a class of battery that allows for ever more applications. The main advantage of the li-titanate battery is its remarkably fast recharge time, thanks to its advanced nanotechnology, writes Battery Space. Currently, manufacturers of electric automobiles and bikes use li-titanate batteries, and there is a potential for this type of battery to be used in electric buses for public transportation. However, these batteries have lower inherent voltage, or lower energy density, than other lithium-ion batteries, which can present issues with powering vehicles efficiently. However, their density is still higher than other non-lithium-ion batteries. Applications for these batteries can include military and aerospace uses, and they may also be used for storing wind and solar energy and creating smart grids. Battery Space suggests these batteries could also be used in system-critical backups for power systems.
Most Popular Stories
- Neighbor Warns Chris Brown to Stay Off His Property
- Venezuelan Officials Banned From Traveling in U.S.
- Adrienne Bailon Disses Ex-Lover Rob Kardashian
- Hiring on the Rise at Small Businesses
- NSHMBA Names Lincoln as Automotive Partner
- Hispanic Arts Leaders Unite Across the Border
- Islamic State Fights for Control of Syrian Oil Wealth
- Sanctions Will Hit Russia Hard if Not Lifted Quickly
- Jerry Brown Favors More Shelters for Immigrant Kids
- How to Fit Green Energy Into Your Portfolio