ENP Newswire - 12 June 2014
Release date- 11062014 - ROSEMONT, Ill - Extremity Medical LLC, Parsippany, N.J., an entrepreneurial-based manufacturer of orthopedic implants for the distal extremities, has received 510(k) clearance from the U.S. Food & Drug Administration (FDA) for its new HammerFiXIP fusion system made of Zeniva polyetheretherketone (PEEK)resin from Solvay Specialty Polymers.
Zeniva PEEK - part of Solvay's line of Solviva Biomaterials - has a modulus very close to that of bone plus excellent toughness and fatigue resistance. The FDA clearance was based in part on Solvay's well-developed master access file for Zeniva PEEK. Solvay made the announcement at the 10th Annual Orthopedic Manufacturing & Technology (OMTEC) exposition June 11-12 in Rosemont, Ill.
The HammerFiX implant is the first cannulated hammertoe device made of the non-resorbable polymer PEEK in the U.S., according to Jamy Gannoe, Extremity Medical's president and co-founder. It is used for the fixation of osteotomies and reconstruction of the lesser toes following correction procedures for hammertoe, claw toe, and mallet toe.
'Zeniva PEEK's exceptional properties have enabled us to develop a next-generation hammertoe fixation product that is differentiated among our competition in terms of material and design,' said Gannoe.
The HammerFiX implant, machined from 6-mm-diameter Zeniva PEEK rod stock, was designed for stability and maintenance of the correction. The inherent elasticity of Zeniva PEEK aids in the delivery of the implant in the phalanx. The reverse helical thread pattern of the implant's barbed segment allows for a technique which provides additional compression across the joint.
The implant's design also provides an option to temporarily pin the corrected phalanx to the metatarsal with a guide wire in order to minimize metatarsophalangeal joint subluxation during healing. Zeniva PEEK is also radiolucent which enables the surgeon to better visualize the fusion site via x-ray without the shadows and opacity of titanium.
The HammerFiX implant comes in three sizes - 2.8 mm, 3.4 mm, and 4 mm - to accommodate the size variation of the phalanges.
'This application demonstrates the superior toughness and ductility of Zeniva PEEK over the competition,' said Shawn Shorrock, Global Director of Regulatory Affairs for Solvay Specialty Polymers' healthcare business. 'These unique properties, plus the well-established history of biological safety for Zeniva PEEK, will continue to support its growth in the orthopedic market.'
The manufacturing site for Zeniva PEEK and other Solviva Biomaterials in Alpharetta, Ga., is ISO 13485 registered and the relevant aspects of current Good Manufacturing Practices are also applied. Solvay's biomaterial manufacturing processes are carefully validated and enhanced controls provide product traceability. In addition, all materials are tested in an ISO 17025 accredited lab.
In addition to Zeniva PEEK, Solvay's Solviva Biomaterials line includes Proniva self-reinforced polyphenylene (SRP), one of the world's stiffest and strongest unreinforced thermoplastics which offers exceptional biocompatibility and hardness; Veriva polyphenylsulfone (PPSU), which provides unsurpassed toughness combined with transparency and excellent biocompatibility; and Eviva polysulfone (PSU), which offers toughness in a strong, transparent polymer.
About Extremity Medical LLC
Extremity Medical is a young, yet fast-moving, entrepreneurial company with a strong engineering culture at its foundation. The company develops next-generation products to address the challenging needs of surgeons specific to treating the distal extremities, including the hand, wrist, foot, and ankle. It is focused on identifying unmet needs and developing unique solutions for fusion, fixation, and motion-preserving systems for the upper and lower extremities.
Extremity Medical was founded in northern New Jersey in 2008. Founders Matthew Lyons and Jamy Gannoe are biomechanical engineers experienced in creating and growing successful, fast-moving companies based on orthopedic, cardiovascular, and general surgery technologies. For more information, visit www.extremitymedical.com.
As an international chemical group, SOLVAY assists industries in finding and implementing ever more responsible and value-creating solutions. Solvay generates 90% of its net sales in activities where it is among the world's top three players. It serves many markets, varying from energy and the environment to automotive and aeronautics or electricity and electronics, with one goal: to raise the performance of its clients and improve society's quality of life. The group is headquartered in Brussels, employs about 29,400 people in 56 countries and generated 9.9 billion euros in net sales in 2013. Solvay SA is listed as SOLB.BE on NYSE Euronext in Brussels and Paris (Bloomberg: SOLB:BB - Reuters: SOLB.BR).