On a pound-per-pound basis, carbon nanotube-based fibers invented at
While individual nanotubes are capable of transmitting nearly 1,000 times more current than copper, the same tubes coalesced into a fiber using other technologies fail long before reaching that capacity.
But a series of tests at
That, said the researchers, makes nanotube-based cables an ideal platform for lightweight power transmission in systems where weight is a significant factor, like aerospace applications.
The analysis led by
Present-day transmission cables made of copper or aluminum are heavy because their low tensile strength requires steel-core reinforcement.
Scientists working with nanoscale materials have long thought there's a better way to move electricity from here to there. Certain types of carbon nanotubes can carry far more electricity than copper. The ideal cable (http://news.rice.edu/2013/02/05/essential-armchair-reading-for-nanotube-researchers/) would be made of long metallic "armchair" nanotubes (http://news.rice.edu/2013/02/05/essential-armchair-reading-for-nanotube-researchers/) that would transmit current over great distances with negligible loss, but such a cable is not feasible because it's not yet possible to manufacture pure armchairs in bulk, Pasquali said.
In the meantime, the Pasquali lab has created a method to spin fiber from a mix of nanotube types that still outperforms copper. The cable developed by Pasquali and Teijin Aramid is strong and flexible even though at 20 microns wide, it's thinner than a human hair.
Pasquali turned to Kono and his colleagues, including lead author
Pasquali said there has been a disconnect between electrical engineers who study the current carrying capacity of conductors and materials scientists working on carbon nanotubes. "That has generated some confusion in the literature over the right comparisons to make," he said. "Jun and Xuan really got to the bottom of how to do these measurements well and compare apples to apples."
The researchers analyzed the fiber's "current carrying capacity" (CCC), or ampacity (http://en.wikipedia.org/wiki/Ampacity), with a custom rig that allowed them to test it alongside metal cables of the same diameter. The cables were tested while they were suspended in the open air, in a vacuum and in nitrogen or argon environments.
Electric cables heat up because of resistance. When the current load exceeds the cable's safe capacity, they get too hot and break. The researchers found nanotube fibers exposed to nitrogen performed best, followed by argon and open air, all of which were able to cool through convection. The same nanotube fibers in a vacuum could only cool by radiation and had the lowest CCC.
"The outcome is that these fibers have the highest CCC ever reported for any carbon-based fibers," Kono said. "Copper still has better resistivity by an order of magnitude, but we have the advantage that carbon fiber is light. So if you divide the CCC by the mass, we win."
Kono plans to further investigate and explore the fiber's multifunctional aspects, including flexible optoelectronic device applications.
Pasquali suggested the thread-like fibers are light enough to deliver power to aerial vehicles. "Suppose you want to power an unmanned aerial vehicle from the ground," he mused. "You could make it like a kite, with power supplied by our fibers. I wish
The paper's co-authors are
The research was supported by the
TNS 18DejucosGrace-140214-30FurigayJane-4637805 30FurigayJane
Most Popular Stories
- Chobani Counters Competition With Expanded Lineup
- Nevada Range Showdown Draws Armed Supporters
- 'Beige Book' Federal Reserve Survey, April 2014: Full Text
- Iran Denounces U.S. Ruling to Sell Property
- Report: Iran VP Says Row Over Reactor Resolved
- NASA's Space Station Robonaut Finally Getting Legs
- Confusion, Anger as Sunken Ferry's Relatives Wait
- Fiat Chrysler to Build 3 Jeeps in China
- Ohio Couple Married 70 Years, Die 15 Hours Apart
- Hawaii is Genetically Engineered Crop Flash Point