Zinwell is expanding its extensive satellite product line with the new D-ODU which is designed for multi-satellite, channel-stacking low-noise block (LNB) downconverters. In the direct broadcast satellite industry, the company is known for its LNBs, multi-dwelling unit switches and SAT>IP servers.
The MxL865 is based on MaxLinear’s Full-Spectrum Capture™ (FSC™) technology, and can support up to 24 channels over a single cable for simplified connection between the indoor set-top box and rooftop LNB / multi-dwelling unit switch. The device has five FSC wideband inputs for a total capture bandwidth of 10 GHz and features a single L-band IF output.
Zinwell selected the MxL865 because of its low-power draw and high level of integration, which made its high-density channel-stacking D-ODU commercially viable. The 10mm x 10mm device integrates a host CPU microcontroller, FSK and DiSEqC modems and power management controllers. The device also includes all major supporting analog functions such as broadband input and output filters, RF gain blocks, channel filters, PLLs and automatic gain control (AGC) functionality.
The MxL865 exceeds strict RF performance and MOCA co-existence requirements from leading direct broadcast satellite operators. Having this additional performance helps customers like Zinwell significantly reduce the design complexity so they can enter the market quickly with a robust D-ODU solution.
“MaxLinear’s D-ODU product family has been very well received in the market due to its high level of integration, low power consumption and unmatched performance to meet strict operator specifications,” said
“Zinwell is constantly looking at the future of our markets and laying the groundwork for long-term development,” said
The MxL865 is part of a family of 24-channel SoCs designed to replace existing analog channel-stacking ICs that can only support up to three channels per device. The MxL865 has five FSC wideband RF inputs and features a single L-band IF output. The MxL865 supports a total RF capture bandwidth of 10 GHz.
Other parts in the family include the MxL868, which has eight FSC half L-band inputs for either LNB or MDU applications and the MxL862, which has two FSC wideband inputs and features a single L-band IF output. The MxL862 supports a total RF capture bandwidth of 4.1 GHz.
All of the MxL86x devices support both FSK and DiSEqC / EN50607 operation on the IF port. They come with a software environment that includes a real-time operating system running on an embedded 32-bit CPU with a complete set of APIs to control the band translation and channel stacking engine and the chip interfaces.
Due to the devices’ high levels of system integration, the bill of material (BOM) in end applications is reduced to a minimal number of low-cost, passive components, which enables ultra-compact low cost system solutions when compared to existing analog solutions.
Zinwell was founded in
MxL, Full-Spectrum Capture, FSC and the
Cautionary Note About Forward-Looking Statements
This press release contains “forward-looking” statements within the meaning of federal securities laws. Forward-looking statements include, among others, statements concerning or implying future financial performance or trends and growth opportunities affecting
Senior Director, Consumer Product Line
Most Popular Stories
- Senate Dems Pull All-Nighter on Global Warming
- Rand Paul Takes Pot Shot at Ted Cruz
- Why New Workers Can't Get Ahead
- myLINGO Translates Hollywood Films into Spanish
- Obama Plugs ACA on Zach Galifianakis Show
- Dianne Feinstein Accuses CIA of Spying on Congress
- OECD Forecasts Slowdown in Global Growth
- Software Writers Sought in Indiana
- Toledo Jeep Plant Hiring Part-Timers
- Miley Cyrus Performs in Undies After Costume Goes Missing