Speaking to reporters, Mr.
He added, “It is quite common for T1 E1 signals, within a central office environment or an enterprise telecom room, to not meet pulse mask requirements due to interference, too long or short cable lengths, improper impedances, or simply poor transmitter design. In such cases, jitter measurement & pulse mask compliance is very useful in diagnosing problems. The jitter and pulse mask compliance test capability is available in GL's Dual T1 E1 Express (PCIe) Boards, Universal T1 E1 Boards, and tProbe™ T1 E1 Analyzer platforms.”
"GL’s Jitter Measurement software allows one to accurately measure jitter associated with a incoming T1 E1 signals. It also allows evaluation of the jitter on either a tick-by-tick or a cumulative basis. In addition to these, the application recognizes the very slow variations in a clock signal (below 1 Hz), and the Frequency Offset or Deviations in clock rates. This application in conjunction with GL’s Jitter Generation application can be used to test jitter transfer function to confirm that there is no amplification of jitter by network elements (NEs) in the transmission system.
"GL’s Jitter Generation software has been developed to generate a jittered output T1 E1 signal with user-selected frequency and amplitude. It is suitable for testing jitter tolerance and compliance with standards such as G.823."
·Generates intrinsic jitter without any error as per G.823 standards
·Generates user-defined jitter value against an input jitter tolerance mask to test DUTs capability to tolerate large amounts of generated jitter.
·In conjunction with Jitter Measurement provides peak-to-peak jitter value for a given frequency at the system output
·Evaluate the jitter in real-time on either a tick-by-tick or a cumulative basis
Founded in 1986,
With its proven expertise of over 25 years, GL has a comprehensive suite of telecom testing solutions to verify and ensure 'quality and reliability' of variety of telecom networks including Wireless, and high-speed fiber optic lines.
GL's test tools range from simple PC-based software test tool to all-encompassing hardware units with futuristic expansion capabilities. GL's test solutions cover wide array of networks – 4G (LTE), 3G, IP, Ethernet, T1, T3, E1, E3, OC-3/STM-1, OC-12/STM-4, and traditional PSTN networks.
GL's tools are widely used by the telecommunication industry for conformance testing, automated stress/load testing, performance testing, remote accessibility, centralized web-based control and analysis, fault testing and analysis, and customized testing.
Read the full story at http://www.prweb.com/releases/glcommunicationsinc/jitter-generation-softwar/prweb11145575.htm
Most Popular Stories
- Updates on Everglades' Stranded Pilot Whales
- NSA Tracks 5 Billion Cellphone Records a Day
- Hezbollah Chief's Assassination Claimed by Sunni Group
- Stolen Cobalt-60 Recovered in Mexico
- Ford Mustang Still Packs Power
- Wind Power and Wildlife Can Coexist
- Allstate Seeks to Invest in Minority Firms
- Sarmiento to Handle Greeley Latin Ops
- First-time Jobless Claims Drop Below 300,000
- White House Pushes to Extend Unemployment Benefits