HOUSTON, TX -- (Marketwired) -- 08/26/13 --
Intergraph has published a new case study that describes how CAESAR II helped PETROFAC (Saudi Arabia) succeed on the $5 billion Rabigh II refining and petrochemical project for Saudi Aramco and Sumitono Chemical. The project included engineering and design for a large new aromatics complex and facility expansion to process ethane and naphtha, with 248 systems requiring stress analysis. Petrofac chose Intergraph® CAESAR II® for the project deliverables which included stress isometrics using the ISOGEN tool plus calculations, plots, datasheets, and reports. The collaboration that Intergraph software provides between engineering and design proved a major benefit. Even with this project's 198 interface points with other contractors, the flow and sharing of engineering information was smooth and efficient because so many of them use Intergraph CADWorx & Analysis Solutions. The easy interface between design and engineering helped PETROFAC reduce man-hours by 20 to 25%, and the accurate analyses CAESAR II provides helped eliminate project risks and overcome challenges of the desert-like conditions.
To read the article, visit http://coade.typepad.com/coadeinsider/2013/08/petrofac-saudi-arabia-benefits-from-intergraph-engineering-and-design-collaboration.html. For information about PETROFAC, visit http://www.petrofac.com/.
For information on Intergraph analysis products, visit http://www.intergraph.com/ppm/analysis.aspx. For more information on Intergraph CADWorx, visit http://www.intergraph.com/products/ppm/cadworx/.
About Intergraph CADWorx & Analysis Solutions
The Intergraph CADWorx & Analysis Solutions (CAS) products allow design and engineering to share relevant information seamlessly, thereby maintaining accuracy and improving efficiency. They include CADWorx Plant Design Suite for AutoCAD®-based intelligent plant design modeling, process schematics and automatic production of plant design deliverables; CADWorx DraftPro for intelligent 2D design and layout; CAESAR II, the world's most widely used pipe stress analysis software; PV Elite for vessel and exchanger design and analysis; and TANK for the design and analysis of oil storage tanks. For information on Intergraph CAS, visit www.coade.com.
Intergraph, the Intergraph logo, CADWorx and CAESAR II are registered trademarks, and PV Elite, and TANK are trademarks of Intergraph Corporation. Other brands and product names are trademarks of their respective owners. © 2013 Intergraph Corp. All rights reserved.
Add to DiggBookmark with del.icio.usAdd to Newsvine