New research at
And it's unlikely that many of the other labs currently trying to harness the potential of graphene (http://en.wikipedia.org/wiki/Graphene), a single-atom sheet of carbon, for microelectronics would have come up with the technique the
The discovery by lead author
A bit of water adsorbed from the atmosphere was found to act as a mask in a process that begins with the creation of patterns via lithography and ends with very long, very thin graphene nanoribbons. The ribbons form wherever water gathers at the wedge between the raised pattern and the graphene surface.
The water formation is called a meniscus (http://en.wikipedia.org/wiki/Meniscus); it is created when the surface tension of a liquid causes it to curve. In the
Tour said any method to form long wires only a few nanometers wide should catch the interest of microelectronics manufacturers as they approach the limits of their ability to miniaturize circuitry. "They can never take advantage of the smallest nanoscale devices if they can't address them with a nanoscale wire," he said. "Right now, manufacturers can make small features, or make big features and put them where they want them. But to have both has been difficult. To be able to pattern a line this thin right where you want it is a big deal because it permits you to take advantage of the smallness in size of nanoscale devices."
Tour said water's tendency to adhere to surfaces is often annoying, but in this case it's essential to the process. "There are big machines that are used in electronics research that are often heated to hundreds of degrees under ultrahigh vacuum to drive off all the water that adheres to the inside surfaces," he said. "Otherwise there's always going to be a layer of water. In our experiments, water accumulates at the edge of the structure and protects the graphene from the reactive ion etching (RIE). So in our case, that residual water is the key to success.
"Nobody's ever thought of this before, and it's nothing we thought of," Tour said. "This was fortuitous."
Abramova and Slesarev had set out to fabricate nanoribbons by inverting a method developed by another
"We first suspected there was some kind of shadowing," Abramova said. But other metals that didn't expand as much, if at all, showed no difference, nor did varying the depth of the pattern. "I was basically looking for anything that would change something."
It took two years to develop and test the meniscus theory, during which the researchers also confirmed its potential to create sub-10-nanometer wires from other kinds of materials, including platinum. They also constructed field-effect transistors to check the electronic properties of graphene nanoribbons.
To be sure that water does indeed account for the ribbons, they tried eliminating its effect by first drying the patterns by heating them under vacuum, and then by displacing the water with acetone to eliminate the meniscus. In both cases, no graphene nanoribbons were created.
The researchers are working to better control the nanoribbons' width, and they hope to refine the nanoribbons' edges, which help dictate their electronic properties.
"With this study, we figured out you don't need expensive tools to get these narrow features," Tour said. "You can use the standard tools a fab line (http://en.wikipedia.org/wiki/Microfabrication) already has to make features that are smaller than 10 nanometers."
TNS 18DejucosGrace-130730-30FurigayJane-4439814 30FurigayJane
Most Popular Stories
- Twitter Coming to Phones Without Internet
- NASA Fellowships, Scholarships Bring Diversity to Workforce
- Dish Network Leads 2013 Top 50 Advertisers List
- Entravision Initiates Quarterly Cash Dividend
- Networks Vie for U.S. Hispanic TV Viewers
- Ad Counts Rise in 2013 for Hispanic Magazines
- Warner Bros. Unleashes 'Hobbit: Desolation of Smaug' Merchandise
- Shanghai Smog Forces Factory Shutdowns
- How to Arm Yourself Against CryptoLocker Virus
- Amanda Bynes Enrolls in California's FIDM