New AS8506 cell monitoring IC eliminates need for complex software and reduces hardware requirements in battery cell management systems
The innovative architecture developed by ams has been implemented in a new, highly integrated chip, the AS8506, to perform distributed cell monitoring and balancing operations for stacked cell modules, including Safe Operating Area (SOA) checks and passive or active cell balancing. It is ideal for all lithium-based cell chemistries, such as those found in hybrid and fully electric vehicles, as well as for EDLCs (also known as supercaps or ultracaps).
In conventional systems, a complicated algorithm running remotely on a high-end microcontroller decides which cells have to be balanced. The new architecture supported by the AS8506 can control balancing locally at the cells, enabling designers to implement a more streamlined cell management system that eliminates the powerful host controller, complex software and vulnerable serial communication links normally used today.
The AS8506 can implement both passive and active cell balancing autonomously, or it can support a microcontroller-based system via its Serial Peripheral Interface. An advanced analog circuit in the AS8506 compares up to seven cell voltages against an internal or external reference with an accuracy of 1mV, to support cell-balancing and cell-monitoring functions. Cell voltage measurements can also be digitized with an accuracy of 5mV and reported to a host controller.
Active and passive cell balancing use a similar circuit design, but active balancing requires an additional flyback transformer. The control circuit is integrated in the AS8506.
The device also features internally or external adjustable upper and lower cell voltage limits. Temperature measurement is carried out through two external NTC sensors.
The fully autonomous cell management architecture enabled by the AS8506 is in stark contrast to the typical system implementations found today using existing cell monitoring ICs. These are typically limited to the sequential capturing of cell voltage measurements that must be processed by a host controller. These prior architectures have several drawbacks for designers of battery management systems:
“The AS8506 marks a breakthrough in cell monitoring – not an incremental improvement on previous cell monitoring ICs, but a completely new approach”, said
ams is demonstrating the AS8506 at Stand 74 at the
Price & Availability
The AS8506 cell monitoring IC is available for sampling now. It is priced at
ams also provides a non-automotive version called the AS8506C. It is priced at
A stand-alone Cell Balancer Evaluation Kit for the AS8506 is available online from ams, priced at
Download Press Picture or Block Diagram of this IC at
For further information:
phone: +43 (0) 3136 500 31235